Maulana Azad National Institute of Technology Logo
Friday, 22 Mar 2019

Dr. Rajesh Gupta

You are here

RAJESHGUPTA

Dr. Rajesh Gupta

 

Name

Prof. Rajesh Gupta

Designation

Professor

Educational Qualification

M. Sc. Engg. (Canada), Ph.D.

Date of joining

August 10, 1994

Experience

24 years

Specialization

Heat Transfer, Computational Combustion, IC Engine Modelling

No. of Publications (Int.J/National J./Int.conf)

International Journals: 25

National Journals: 02

International Conferences: 14

National Conference: 04

Total: 45

Publications (International Journal):

  1. “Influences of dual bio-fuel (Jatropha biodiesel and Turpentine oil) on single cylinder variable compression ratio diesel engine”, Pankaj Dubey and Rajesh Gupta, J. of Renewable Energy 115 (2018) 1294-1302. (Sci Indexed)
  2. “Application of nano emulsion method in a methanol powered diesel engine”, Dinesh Kumar Soni and Rajesh Gupta, Energy 126 (2017) 638-648. (Sci Indexed)
  3. “Numerical analysis of flow dynamics for two piston bowl designs at different spray angles”, Dinesh Kumar Soni and Rajesh Gupta, Journal of Cleaner Production, 149 (2017) 723-734. (Sci Indexed)
  4. “Effects of dual bio-fuel (Jatropha biodiesel and turpentine oil) on a single cylinder naturally aspirated diesel engine without EGR”, Pankaj Dubey and Rajesh Gupta, Applied Thermal Engineering 115 (2017) 1137–1147. (Sci Indexed)
  5. “Study of the performance and emission characteristics for a dual fuel powered single cylinder diesel engine”, Pankaj Dubey and Rajesh Gupta, Int. J. of Automotive and Mechanical Engineering (IJAME) ISSN: 2229-8649 (Print); ISSN: 2180-1606 (Online); Vol. 13, Issue 2 pp. 3373 - 3388, September 2016. (Scopus indexed)
  6. “Emission Reduction by using Linseed & Turpentine Oil Blend as Alternative Fuel in Diesel Engine”, Narendra Kumar Yadav, Rajesh Gupta and Pankaj Dubey, International Journal of Engineering Research & Technology ISSN: 2278-0181 , Vol. 5 Issue 05, May-2016.
  7. “Effects of piston bowl geometry on combustion and Emission characteristics on diesel engine: A CFD case study”, Chetan S. Bawankar and Rajesh Gupta, IJRET: International Journal of Research in Engineering and Technology eISSN: 2319-1163  pISSN: 2321-7308, Vol.05 Issue: 07, Jul-2016.
  8. “Optimization of methanol powered diesel engine: A CFD approach”, Dinesh Kumar Soni,       Rajesh Gupta, J. Applied Thermal Engg. v. 106 (2016), pp. 390-398. (Sci Indexed)
  9. “Numerical investigation of emission reduction techniques applied on methanol blended diesel engine”, Dinesh Kumar Soni,  Dr. Rajesh Gupta, Alexandria Engineering Journal v. 55 (2016), pp. 1867-1879 (Sci indexed)
  10. “Emission Control Using Methanol, Ethanol And Butanol In Diesel Engine: A Comparison Through CFD Simulation”, Dinesh Kumar Soni, Rajesh Gupta, IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE) e-ISSN: 2278-1684, p-ISSN: 2320-334X, Volume 12, Issue 6 ver. VI (Nov. - Dec. 2015), PP 17-23, DOI: 10.9790/1684-12661723. (Indexed in Copernicus Internationals)
  11. “Comparison of performance and emission characteristics of diesel and diesel-water blend under varying injection timings”, Dinesh Kumar Soni, Rajesh Gupta, International Journal of Engineering, Science and Technology, Vol. 7, No. 4, 2015, pp. 49-59 (AJOL)
  12. “Numerical investigation of piston bowl geometry and swirl ratio on emission from diesel engines”, Abdul Gafoor C.P., Rajesh Gupta, Energy Conversion and Management, v. 101 (2015) 541–551. (Sci Indexed)
  13. “Performance Analysis of an Air Operated Micro-turbine”, Aman Saraf, Anshul Sungra, Rajesh Gupta, J. of Sustainable Manufacturing & Renewable Energy, v. 3, pp. 129-138, 2015, ISSN 2153-6821.
  14. “Turbulent Flow over an elliptical Cylinder”, Manish Rawat, Dinesh Kumar Soni, Rajesh Gupta, Intl. Journal of Scientific Engineering and Technology,  Special  Issue, 2014, ISSN : 2277-1581, pp. 58-62. (Google Scholar, DOAJ, EDLIB, DRJI, JIFactor)
  15. “A numerical study of methane-air premixed flame in a diverging micro-channel”, Mohit Gupta, Rajesh Gupta, Indian J. App. Res, v. 3(9), pp. 217-221, 2013, ISSN - 2249-555X. (Copernicus Internationals, Google Scholar, DOAJ, Citeseer)
  16. “High Reynolds number flow over cylinders: A Review”, Manish Rawat, Dr. Rajesh Gupta, Dr. R.M.Sarviya, Intl. J. of App. Res. in Engg & Mgmt., Vol. 2 (6), June 2013, ISSN 2319 - 4847 . (Google Scholar)
  17. “Performance Analysis of a Pulsejet Engine”, S. R. Chaurasia, Rajesh Gupta and R.M. Sarviya, Intl. J. Engg Res & Appl, v. 3(4), pp.605-609, 2013, ISSN: 2248-9622. (Copernicus Internationals, Google Scholar, DOAJ, Citeseer)
  18. “Simulation of non-premixed natural gas flame”, Rajesh Gupta and Ashish Puriya, Intl. J. of Science and Research, Vol. 2(5), pp. 97-100, 2013, ISSN: 2319-7064.
  19. “Cold Flow Simulation in a CI Engine”, Vivek Nema, Rajesh Gupta and A. Rahman, Intl. J. Comput. Sci & Engg., vol. 3(1), pp. 9-19, 2013, ISSN 2249-4251.
  20. “Numerical simulation of flow around an elliptical cylinder at high Reynolds numbers”, Manish Rawat, Dr. Rajesh Gupta, Dr. R.M.Sarviya, Intl. J. Fluids Engg, Vol. 5 (1), pp. 29-37, 2013, ISSN 0974-3138.
  21. “Mathematical Analysis of Inclined Ground Heat Exchanger”. Rajesh Gupta and Dinesh Soni, Global Journal of Mathematical Sciences vol. 5(1), pp. 31-46, 2013, ISSN 0974-3200.
  22. “Design, Development and Testing of Low Capital and Operational Cost Shrub Cutting Machine” R. K. Mandloi, Rajesh Gupta and A. Rehman, J. of Rang. Sci., 2011, Vol. 1 (2):121-124.
  23. “Fluid flow and heat transfer in a single-pan wood stove”, Rajesh Gupta and N.D. Mittal, Intl. J. of Engg Sci & Technology, v. 2(9), 4313-4325, 2010, ISSN: 0975-5462. (Google Scholar, DOAJ, Citeseer)
  24. "Pyrolysis modeling in a wood stove", Rajesh Gupta and N.D. Mittal, Intl. J. Engg Sci & Technology Vol. 2(10), pp. 5088-5098, 2010, ISSN: 0975-5462. (Google Scholar, DOAJ, Citeseer)
  25. The Influence of Linear Mechanisms in the Adjustment of Sheared Turbulence to Flow Curvature”, Holloway, A.G.L. and Gupta, R., J. Phys. Fluids A, v. 5 no. 12, pp. 3197-3206, 1993 (Sci indexed).
National Journal: “Aerodynamic analysis of Audi A4 Sedan using CFD”, S.K. Birwa, N. Rathi, R. Gupta, J. Inst. Engrs. India: Ser. C, V.  94 (2),  pp. 105-111, 2013, ISSN 2250-0545.
International Conference:
  1. “Effects of turbulence penetration on valve leakage in nuclear reactor coolant system”, Rajesh Gupta, Sagar Paudel, Utkarsh Sharma and Amit Kumar, Intl Conf. on Nuclear and Renewable Energy, New York, USA, June 6-7, 2016.
  2. “Performance and emission characteristics of a dual fuel powered single cylinder diesel engine”, Pankaj Dubey and Rajesh Gupta, Intl. conf. on Recent Trends in Engineering and Material Sciences (ICEMS-2016), Jaipur National University, March 17-19, 2016.
  3. “Combustion Simulation in A Differentially Heated Diffuser Under Free Convection”, Rajesh Gupta, Pankaj Dubey, Gopal Kumar Deshmukh, Intl conf. on Trends in Industrial and Mechanical Engg. ICTIME 2016, M.A.N.I.T., Bhopal (India), 4-6 Feb, 2016.
  4. “Comparative Study of Methane-Air and Syn Gas Premixed Flames for Co and CO2 Emission”, Atul Joshi,  Rajesh Gupta, Intl. Conf. on New Frontiers in Chemical, Energy and Environmental Engineering INCEEE-2015, Chemical Engineering, National Institute of Technology, Warangal (India) March 20-21, 2015.
  5. “Performance Analysis of an Air Operated Micro-turbine”, Aman Saraf, Anshul Sungra, Rajesh Gupta, Intl. Conf. on Industrial, Mechanical and Production Engineering: Advancements and Current Trends, M.A.N.I.T., Bhopal, India, Nov 27- 29, 2014.
  6. “Performance Analysis of Conventional LPG Cooking Stove”, Pulkit Agarwal, Abhishek Anand, Rajesh Gupta, Intl. Conf. on Industrial, Mechanical and Production Engineering: Advancements and Current Trends, M.A.N.I.T., Bhopal, India, Nov 27- 29, 2014.
  7. “A Numerical Study Of Methane-air Premixed Flame In A Micro-channel”,  Atul Joshi and  Rajesh Gupta, International Conference on MEMS and Sensors, IIT Madras, Chennai, India, Dec 18-20, 2014
  8. “Turbulent Flow Over an Elliptical Cylinder”, Manish Rawat, Dinesh Kumar Soni, Rajesh Gupta, Intl Conf. on Hydraulics, Water resources & Environmental Engineering , MANIT, Bhopal (M.P.) India, Dec 18-20, 2014.
  9. “Verification of effects of turbulence penetration on valve leakage in nuclear reactor coolant system”, Sagar Paudel, Utkarsh Sharma, Rajesh Gupta, Intl Conf. on Hydraulics, Water resources & Environmental Engineering , MANIT, Bhopal (M.P.) India, Dec 18-20, 2014.
  10. “A comparative study of  Methane-air and Syn gas premixed flames for NOx formation”,  Atul Joshi and  Rajesh Gupta, Eastern Section Technical Fall Meeting of Combustion Institute of USA, Clemson University, USA, Oct 13-16 2013.

 

National Conference:
  1. Numerical Simulation of Methane-Air and Syn Gas Premixed Flames: A Comparison of NOx Emission ”, Rajesh Gupta, Atul Joshi and Chetan Bawankar, 24th National Conference on I. C. Engine and Combustion (NCICEC- 2015), UPES, Dehradun, India, October 30-November 1, 2015.
  2. “Combined Effect of Initial Swirl and Bowl Geometry on Spray—A Numerical Simulation”, Abdul Gafoor C.P. and Rajesh Gupta, 24th National Conference on I. C. Engine and Combustion NCICEC- 2015), UPES, Dehradun, India, October 30-November 1, 2015.
  3. “Emissions & Performance Evaluation of Diesel Engine using Diesel Water Blend: A Comparison”,  Dinesh Kumar Soni and Rajesh Gupta, 24th National Conference on I. C. Engine and Combustion NCICEC- 2015), UPES, Dehradun, India, October 30-November 1, 2015.
  4. “Numerical simulation of non-premixed flame of wood volatile - air in a heated vertical diffuser in free convection condition”, Gopal Deshmukh and Rajesh Gupta, 23rd National Conference on I. C. Engine and Combustion (NCICEC 2013), SVNIT, Surat, India, December 13-16, 2013.

 

Projects undertaken:
  1. Flow Simulation in a Single Pan Wood Stove, MHRD, GOI , Rs. 14 Lakh, April 2010 (Completed).
  2. Development of CFD Laboratory, MHRD, GOI, Rs. 20 Lakh, April 2011(Completed).
  3. Up gradation of CFD Laboratory, MHRD-MANIT In house Scheme, Rs. 27 Lakh, July 2011(Completed).

 

Consultancy work undertaken:
  • Evaluation of anti-condensation paint (Rs. 80,000.00) for BHEL, Bhopal, April 2008
  • Testing of prototype of Crimped pin type heat exchanger (Rs. 40,000.00) Shrao Engg Works, Bhopal, June 2011
  • Testing of prototype of L-pin type heat exchanger (Rs. 40,000.00) for Fitwell Corporation, Bhopal, Aug 2011
  • Technical advice to Madhya Pradesh Bhoj Open University, Bhopal for a DG set (Rs. 10,000.00), Feb 23, 2012.
  • Testing of prototype of Crimped pin type air cooler (Rs. 57,500.00) JBL, Engineering Pvt Ltd, Bhopal, October 2016
  • Testing of prototype of Crimped pin type air cooler (Rs. 69,000.00) LVHE Pvt Ltd, Hardwar Feb 2017.

 

Foreign Visits
  1. Paper presented in 18th International Conference on Nuclear and Renewable Energy ICNRER- 2016 held during June 6-7, 2016 in New York, USA
  2. Paper presented Technical Fall Meeting of Eastern Section Combustion Institute of USA, Clemson University, USA, Oct 13-16 2013.

 

Expert Lectures delivered:
  1. Expert lecture delivered on, “Fundamentals of Heat Transfer”, Advances in Heat and Mass Transfer, Mechanical Engg, MANIT, Bhopal, June 3-7, 2013.
  2. Expert lecture delivered on, “Simulation of Tranport Processes”, Advances in Heat and Mass Transfer, Mechanical Engg, MANIT, Bhopal, June 3-7, 2013.
  3. Expert lecture delivered on , “Simulation of Transport Phenomenon”, in STTP on CFD: Basics & Applications, Civil Engg, MANIT, June17-21, 2013.
  4. Expert lecture delivered on, “Numerical Solution of Partial Differential Equations”, in STTP on CFD: Basics & Applications, Dept of Mathematics, MANIT, June17-21, 2014.
  5. Expert lecture delivered on, “CFD Basics”, in STTP on Recent Trends and Challenges in Thermal Engineering, at Mechanical Engineering in S.A.T.I.,Vidisha, April 1-5, 2015.
  6. Expert lecture delivered on, “CFD: Basics”, B.H.E.L., Bhopal, November 26, 2015.
  7. Expert lecture delivered on, “ANSYS Fluent”, B.H.E.L., Bhopal, December 28, 2015.
  8. “Numerical investigation of recirculation of burned gases on CH4-H2 diffusion flame in a jet in hot co-flow (JHC) burner”, Punit Kumar, P Anil Kishan, 1st International ISHMT-ASTFE Heat and Mass Transfer Conference, IHMTC-2015, Paper No. 562, 17-20 December, 2015, Thiruvananthapuram, India
  9. Characteristics of coherent structures in turbulent swirling hydrogen flames-effect of swirl velocity, Suresh V. Balaji, Ashok De, 1st International ISHMT-ASTFE Heat and Mass Transfer Conference, IHMTC-2015, Paper No. 934, 17-20 December, 2015, Thiruvananthapuram, India
  10. “Prediction of droplet sizes and distribution formed during impact of slug of liquid on solid surface”, A.V. Shelke, B. Gera, R. K. Singh, 1st International ISHMT-ASTFE Heat and Mass Transfer Conference, IHMTC-2015, Paper No. 934, 17-20 December, 2015, Thiruvananthapuram, India
  11. “Effect of variation of degree of premixing on interacting flames”, Uddalok Sen, Chandrachur Bhattacharya , Achintya Mukhopadhyay, Swarnendu Sen, 1st International ISHMT-ASTFE Heat and Mass Transfer Conference, IHMTC-2015, Paper No. 1103, 17-20 December, 2015, Thiruvananthapuram, India
  12. “Experimental research on the diffusion flame formation and combustion performance of forced swirl combustion system for DI diesel engines”, Liwang Su,  Xiangrong Li, Xu He, Fushui Liu, Paper No. ECM-D-15-03073, J. of Energy Conversion & Management (Elesevier Publication).
  13. “Modelling study on the effect of piston bowl geometries in a gasoline/biodiesel fuelled RCCI engine at high speed”, J. Li, W.M. Yang, D.Z. Zhou, Department of Mechanical Engineering, Faculty of Engineering, National University of Singapore, Singapore 11757, Paper No. ECM-D-15-04338, J. of Energy Conversion & Management (Elesevier Publication).
  14. “A numerical study on the effect of various combustion bowl parameters on the performance, combustion and emission behaviour on a single cylinder diesel engine”, Dhinesh. B, Sabari Rajan. S.A., Isaac Joshua Ramesh Lalvani. J, Parthasarathy. M, and Annamalai. K, Department of Automobile Engineering, Madras Institute of Technology campus, Anna University, Chennai, India, Manuscript Number: ECM-D-16-02491, J. of Energy Conversion & Management (Elesevier Publication).

 

Membership of society/ position held in society

  1. Member of the Institution of Engineers (LM-11387)
  2. Life member of the ISTE
  3. Member of the SAE, India
  4. Member of American Mathematical Society
  5. Member of Combustion Institute (Indian Section)

 

Any other information

E-Mail: dr.gupta.rjp@gmail.com,rajeshgupta@maint.ac.in